Oberdorfer Pumps

Oberdorfer

Oberdorfer Pumps, a subsidiary of Thomas Industries Inc., has manufactured high-quality, dependable pumps for over 100 years. They include all bronze gear pumps, centrifugal pumps, rubber impeller pumps, and macerator pumps, for the Marine, Industrial, Agricultural, and Chemical Processing fields Oberdorfer pumps are used in the transfer, recirculation, and processing of various chemicals; fuel, oils, water, acids, caustics, and other fluids. Oberdorfer is committed to producing a quality product at competitive prices with short lead times. We are proud to distribute products from an American pump manufacturer with a commitment to quality, tradition and innovation. Oberdorfer has been doing this since 1890.


Oberdorfer Gear Pumps

Oberdorfer close coupled, self priming, motor driven, all bronze gear pumps with carbon bearings, drip proof lip seal & relief valve.Ideal for dockside quick oil change or for engine room use.Not for use with gasoline.

Oberdorfer Marine Pumps For Air Conditioning And  Refrigeration

Oberdorfer all bronze straight centrifugal and self priming pumps with motors with 416 stainless steel shafts for marine air conditioning and refrigeration.Designed specifically for use as raw water recirculation pumps on marine air conditioners. These pumps are widely used by major manufacturers of marine A/C units as standard equipment on their new products.

 Oberdorfer Marine Air Conditioning / Refrigeration Pumps Less Motors

Oberdorfer all bronze straight centrifugal and self priming pumps for marine air conditioning and refrigeration. Does not include motor (wet end only)

Oberdorfer Macerator Pump w/Vacuum Switch 25 GPM # 406MK-7N26 (CC)

Oberdorfer, macerator, single phase, close-coupled, bronze, self priming, rubber impeller pump with vacuum switch. Designed specifically for pumping sewage from boats to holding tanks or sewer connections. The function of the pump is to suction the solids and liquids from the holding tanks, grind the effluent with the rotating cutter head down to a small particle size and discharge of the waste to a convenient receptacle either above or below the pump elevation. Macerator pumps are not designed to be run dry of liquids. The impellers will wear and the pumps capacity to discharge the liquids will be lessened. The Oberdorfer macerator pump will macerate and pump all waste and tissue normally found in marine waste systems. IT WILL NOT HANDLE HARD SOLID OBJECTS, SANITARY NAPKINS, OR RAGS.

Oberdorfer Macerator Pump less Motor and Vacuum Switch, 25 GPM # 406M-07 (BB)

Oberdorfer Macerator Pump less Motor and Vacuum Switch, 25 GPM # 406M-07, single phase, close-coupled, bronze, self priming, rubber impeller pump with vacuum switch. Oberdorfer macerator pumps are ideal to empty waste in recreational vehicle and boats. The macerator section grinds waste down to a particle size of that can be easily pumped through the discharge line. The pump is self-priming, permitting the unit to be mounted above or below the tank in a convenient location. For optimal efficiency, the pump should be located as close to the waste source as practical. The Oberdorfer macerator pump will macerate and pump all waste and tissue normally found in marine waste systems. IT WILL NOT HANDLE HARD SOLID OBJECTS, SANITARY NAPKINS, OR RAGS.

Oberdorfer Bronze Rubber Impeller Pump 25 GPM # 405MK-7-M26K (CC)<br>

Oberdorfer 25 GPM (1500 GPH), 3/4 HP 1800 RPm 115/230/1/60 close-coupled, all bronze, self priming, rubber impeller pump. Designed for bilge, washdown, baitwell and general water transfer

Oberdorfer Bronze Rubber Impeller Pump (less motor) 25 GPM # 405M-07 (BB)<br>

Oberdorfer Bronze Rubber Impeller pump end only(motor not included) for model 405MK-7-M26K. Oberdorfer, close-coupled, all bronze, self priming, Buna N rubber impeller pump. Designed For Bilge, Washdown, Baitwell and General Water Transfer.

Oberdorfer Factory Literature

Questions & Answers

Ask a question about Oberdorfer. Click here
Customer Reviews



About Us Contact Us Customer Reviews Facebook Twitter Disclaimers Privacy Policy Returns Shipping Policy Terms of Sale Terms of Use Warranty FAQ Site Map Technical Info Terminology Troubleshooting
  • Internet prices apply only to Internet purchases.
  • Minimum order amount is $20.00.
  • All merchandise listed is in stock.
  • Orders are shipped the next business day.
  • We only sell within the 48 adjacent United States.
  • Shipping tracking numbers are e-mailed automatically.
  • Office hours are: Mon - Fri, 8am - 4:30pm EST excl. holidays.
Copyright © 2024 All Rights Reserved.